Setup Guide

no shutdown
Configuring the Management Route
Define a path from the S6010–ON to the network from which you are accessing
the S6010–ON remotely.
Management routes are separate from IP routes and are used to manage the
S6010–ON through the management port.
• Configure a management route to the network from which you are accessing
the system.
CONFIGURATION mode
management route ip-address/mask gateway
Configuring the Username and Password
To access the system remotely, configure a system username and password.
• To access the system remotely, configure a username and password.
CONFIGURATION mode
username username password [encryption-type]
Configuring the Enable Password
Access EXEC Privilege mode using the enable command. EXEC Privilege mode is
unrestricted by default. As a basic security measure, configure a password.
There are two types of enable passwords:
• enable password — stores the password in the running/startup configuration
using a data encryption standard (DES)-encryption method.
• enable secret — stores the password in the running/startup configuration using a
stronger, MD5-encryption method.
Dell Networking recommends using the enable secret password.
• To access EXEC Privilege mode, create a password.
CONFIGURATION mode
Configure the Software 28