Install Guide

LED Description
• Blinking amber one second on/one second o—port locator
function
QSFP+ port when used as four ports of 10G. All four LEDs are used.
• O—No Link
• Solid amber—4x10G speed
• Blinking amber—port activity at 4x10G speed
• Blinking amber one second on/one second o—port locator
function
Stack number
Displays the stack unit number of the switch
Displays "1" if switch is not part of a stack
Management port Link LED
• O—no link
• Solid green—link on 1G speed
• Solid amber—link on 10/100 Mbps speeds
Management port Activity LED
• O—no link
• Blinking green—transmit/receive is active
Fan
• Solid green—fan powered and running at the expected RPM
• Blinking amber—fan failed, including incompatible airow
direction when you insert the PSU or fan trays with diering
airows
Power
• Solid green—normal
• Solid amber—POST is in progress
• Blinking amber—power supply failed
• O—no power
Figure 6. S6010–ON PSU-side LEDs
1
Fan LED 2 PSU LED
Table 2. S6010–ON PSU-side LED behavior
LED Description
Fan LED
• O—no power to fan/failure
10 S6010–ON System