Administrator Guide

Example
displaying ingress
priority-group
level snapshot for
the specific
interface
DellEMC# show hardware buffer-stats-snapshot resource interface fortyGigE
1/1 priority-group 7
Unit 1 unit: 0 port: 1 (interface Fo 1/1)
---------------------------------------
PG# SHARED CELLS HEADROOM CELLS
---------------------------------------
7 0 0
DellEMC#show hardware buffer-stats-snapshot resource interface fortyGigE 1/1
priority-group all
Unit 1 unit: 0 port: 1 (interface Fo 1/1)
---------------------------------------
PG# SHARED CELLS HEADROOM CELLS
---------------------------------------
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
show hardware counters interface
Display the counter information for a specific interface.
Syntax
show hardware counters interface interface
Parameters
counters Enter the keywords counters to display counter value for the specified stack-member
the port-pipe.
interface interface
Enter any of the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
500 Debugging and Diagnostics