Users Guide

EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.0 Introduced on the E-Series.
8.3.19.0 Introduced on the S4820T.
Usage Information
The show crypto ipsec sa ipv6 command output displays security associations set up for OSPFv3 links in
IPsec authentication and encryption policies on the router.
Related Commands
show crypto ipsec policy – displays the conguration of IPsec authentication and encryption policies.
Example
show crypto ipsec sa ipv6 Command Fields
Field
Description
Interface IPv6 interface
Link local address IPv6 address of interface
IPSecv6 policy name Name of the IPsec security policy applied to the interface.
inbound/outbound
ah
Authentication policy applied to inbound or outbound trac.
inbound/outbound
esp
Encryption policy applied to inbound or outbound trac.
spi Security policy index number used to identify the policy.
transform Security algorithm that is used to provide authentication, integrity, and condentiality.
in use settings Transform that the SA uses (only transport mode is supported).
replay detection
support
Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS ACTIVE: The authentication or encryption policy is enabled on the interface.
1100 Open Shortest Path First (OSPFv2 and OSPFv3)