Specifications

Options :
BR Max :
BR Min :
Date Code : 2014-09-29
CheckCodeExt : 0x0e (0x0e)
TX Output Disable : Not Disabled
----------------------------------------
Diagnostics Information
----------------------------------------
Module Monitoring Values:
Current Temp: 19.000 (Celsius)
Supply Volts: 0.000 (Volts)
Channel Monitoring Values:
Recv: 0.000 0.000 0.000 0.000 (dBm)
Bias: 0.000 0.000 0.000 0.000 (mA)
Configuration File Format
The configuration file for the opticstool is:
• Optics ID — The ID of the optics port.
• Name — The printable name of the optics device (you must name the SFPs “SFP” and the QSFPs “QSFP”).
Then four entries describe how to read if a device is present, how to select the MUX for accessing the device,
how to reset or unreset the device, and how to read data from the device.
• Present:
• Bus to use to access presence indicators
• Address of the device that indicates presence
• Register of the device that indicates presence
• Bit(s) in the register that indicates presence (supports single bit and low:high range)
• Value of the bits that indicates presence
• MUX settings to access the device
• Select — Hardware gating.
• Bus to use to access presence indicators
• Address of the device that indicates presence
• Register of the device that indicates presence
• Bit(s) in the register that indicates presence (supports single bit and low:high range)
• Value of the bits that indicates presence
• MUX settings to access the device
• Reset — Hardware reset of the device.
• Bus to use to access presence indicators
• Address of the device that indicates presence
• Register of the device that indicates presence
• Bit(s) in the register that indicates presence (supports single bit and low:high range)
• Value of the bits that indicates presence
• MUX settings to access the device
Dell DiagOS Tools 73