Specifications

B | 2 | Lower DRAM test | RO | 0x0
B | 1 | ECC test | RO | 0x0
B | 0 | SPD test | RO | 0x0
…
opticstool
To check the presence or absence of optic devices, link status, and to read data from the optic devices’
EEPROM, use the opticstool.
Tests
There are no tests on the optic devices. You can run a brief report that displays the optic presence or shows
simple data, such as the serial number and device type. For more detailed information, use a device report.
CLI Options
Dell Diag - Optics Tool
version 2.0
admin, 2014-10-01, bamboo-build-num
Syntax: ./opticstool <option>
--h := show this help
--show[=brief] [--int=interface]:= shows ports and optics status
• show — Shows information about the optic devices. With the brief option, only the ID and presence
displays. Without the brief option, more details display, such as the serial number and device type. If
you specify an interface, more detail displays about that device by reading the EEPROM.
Output
show=brief Output
root@dell-diag-os:/etc/dn/diag# opticstool --show=brief
Show Optics in System (brief)
Port # Name Status
------ -------- ------
1 QSFP28 1 PRESENT
2 QSFP28 2 PRESENT
…
show Output
root@dell-diag-os:/etc/dn/diag# opticstool --show
Show Optics in System
Port # Name Status Type Part Number Rev Serial Number
------ -------- ------ ------- --------------- --- ---------------
Dell DiagOS Tools 71