Specifications

CPGC Memtest ................................ PASS
POST:
RTC Battery OK at last cold boot
RTC date Thursday 9/17/2015 19:04:51
POST SPD test ............................... PASS
POST Lower DRAM Memory test
.... Perf cnt (curr,fixed): 0x1DA5A3316,0x3B4B47B00
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
SM Bus1 PHY...done
DxE POST
POST Upper DRAM Memory test
Short memory cell test
....
POST Upper DRAM Memory test ................. PASS
POST PCI test ............................... PASS
POST NVRAM check ............................ PASS
POST overall test results ................... PASS
NVRAM: 00 9F 00 E6 0B 01 00 EA
A2
Version 2.17.1245. Copyright (C) 2015 American Megatrends, Inc.
BIOS Date: 08/28/2015 16:17:45 Ver: 0ACBZ028
Press <DEL> or <F2> to enter setup.
Booting `EDA-DIAG'
Loading DIAG-OS ...
[ 1.238906] dummy-irq: no IRQ given. Use irq=N
[ 11.398168] esas2r: driver will not be loaded because no ATTO esas2r
devices were found
[ 11.426895] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 12.441271] fmc_write_eeprom fake-design-for-testing-f001:
fmc_write_eeprom: no busid passed, refusing all cards
[ 12.452859] intel_rapl: driver does not support CPU family 6 model 77
[FAILED] Failed to start Create Volatile Files and Directories.
See 'systemctl status systemd-tmpfiles-setup.service' for details.
[ OK ] Started Copy rules generated while the root was ro.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Update UTMP about System Boot/Shutdown.
Dell DIAG OS 28