Specifications

Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
Preparing /dev/sda3 EDA-DIAG for rootfs install
Preparing Diag-OS file system : dev /dev/sda3 mnt dir /boot
untaring into /boot
Success: Support tarball created: /boot/onie-support.tar.bz2
Updating Grub Cfg /dev/sda3 EDA-DIAG
Diag OS grub config update : dev /dev/sda3 mnt dir /boot
boot-dir /boot and blk_dev is /dev/sda3
Installing for i386-pc platform.
Installation finished. No error reported.
ONIE ver 3 supports 50_onie_grub...
Generating onie and diag-os grub config using 50_onie_grub
grub cfg /tmp/tmp.aZBTn0 and ngos_mnt /boot
Removing /tmp/tmp.AvXUTZ
Rebooting...
ONIE:/ # discover: installer mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 279: No such
process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
machine restart
BIOS (Dell, Inc.) Boot Selector
<
platform> n.n.n.n 32 port 100G / 2 port sfp+ mgmt
Booting Backup BIOS
SMF Version 0xE: Last POR=0x0, Reset=0x55
POST Configuration
CPU Signature 406D8
CPU FamilyID=6, Model=4D, SteppingId=8, Processor=0
Microcode Revision 125
Platform ID: 0x10041A4E
PMG_CST_CFG_CTL: 0x40006
BBL_CR_CTL3: 0x7E2801FF
Misc EN: 0x840081
Gen PM Con1: 0x203808
Therm Status: 0x884E0000
POST Control=0xEA00010B, Status=0xE6009F00
BIOS initializations...
Dell DIAG OS 27