Specifications
Table Of Contents
- Open Networking Hardware Diagnostic Guide April 2016
- About this Guide
- Installation Instructions for ONIE and the Dell OS
- ONIE Overview
- Dell DIAG OS
- Dell DiagOS Tools
- Technical Support
Or
service dnsmasq stop
service dnsmasq start 15
If you see a port-specific error when you start dnsmasq; for example:
Port 53 already in use.
find the process ID of the process using the specific port (in this example, Port 53) and stop the port.
Start dnsmasq again and check that it starts correctly.
The DHCP/TFTP server is now ready for the ONIE target.
Installation Instructions for ONIE and the Dell OS 21