Specifications

POST Upper DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=4b
Short memory cell test
Perf cnt (curr/fixed): b903308/b9034a8
POST Upper DRAM Memory test ................. PASS
POST Upper DRAM ECC check ................... PASS
POST PCIe test .............................. PASS
POST NVRAM check ............................ PASS
POST overall test results ................... PASS
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Date: 07/09/2014 16:30:33 Ver: 0ACAH015
Press <DEL> or <F2> to enter setup.
GNU GRUB version 2.02~beta2+e4a1fe391
+----------------------------------+
|*ONIE: Install OS |
| ONIE: Rescue |
| ONIE: Uninstall OS |
| ONIE: Update ONIE |
| ONIE: Embed ONIE |
| |
| |
| |
| |
| |
| |
| |
+----------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
ONIE: OS Install Mode ...
Version : 3.20.1.3
Build Date: 2015-03-18T20:55-0700
Info: Mounting kernel filesystems... done.
Info: Mounting LABEL=ONIE-BOOT on /mnt/onie-boot ...
Info: Using eth0 MAC address: 90:b1:1c:f4:ab:ed
Info: eth0: Checking link... up.
Info: Trying DHCPv4 on interface: eth0
DHCPv4 on interface: eth0 failedONIE: Using default IPv4 addr: eth0:
192.168.3.10/255.255.255.0
Starting: dropbear ssh daemon... done.
Starting: telnetd... done.
discover: installer mode detected. Running installer.
Starting: discover... done.
Please press Enter to activate this console. Info: eth0: Checking link... up.
Info: Trying DHCPv4 on interface: eth0
To check the install status inspect /var/log/onie.log.
Try this: tail -f /var/log/onie.log
** Installer Mode Enabled **
ONIE:/ # onie-discovery-stop
Stopping: discover... done.
Installation Instructions for ONIE and the Dell OS 19