Specifications

.
.
.
Please press Enter to activate this console. Info: eth0: Checking link... up.
Info: Trying DHCPv4 on interface: eth0
To check the install status inspect /var/log/onie.log.
Try this: tail -f /var/log/onie.log
** ONIE Update Mode Enabled **
ONIE-RECOVERY:/ #
ONIE-RECOVERY:/ #
ONIE-RECOVERY:/ # DHCPv4 on interface: eth0 failedONIE: Using default IPv4
addr: eth0: 192.168.3.10/255.255.255.0
ONIE: Starting ONIE Service Discovery
Info: Found static url: file:///lib/onie/onie-updater
ONIE: Executing installer: file:///lib/onie/onie-updater
Verifying image checksum ... OK.
Preparing image archive ... OK.
ONIE: Version : n.n.n.n
ONIE: Architecture : x86_64
ONIE: Machine : dell_<
platform>_<platform>
ONIE: Machine Rev : 0
ONIE: Config Version: 1
Installing ONIE on: /dev/sda
Rebooting...
umount: can't remount rootfs read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 0:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
machine restart
BIOS (Dell Inc) Boot Selector
<
platform> (SI) n.n.n.n (32-port TE/FG)
POST Configuration
CPU Signature 30669
CPU FamilyID=6, Model=36, SteppingId=9, Processor=0
Microcode Revision 10b
POST Control=0xea000303, Status=0xe6009f00
MSRs:
Platform ID: f09885d047
PMG_CST_CFG_CTL: 263006
BBL_CR_CTL3: 7e00010f
Perf Ctrl & status: 63d, 63d104706000648
Perf cnt (curr/fixed): 1b5cd9ea/48f7b0a0
Clk Flex Max: 0
Misc EN: 60840080
Therm Status: 88400000 (offset=0x0)
MC0 Ctl: 0
MC0 Status: 0
BIOS initializations...
CPGC Memtest for rank 0 ..................... PASS
CPGC Memtest for rank 1 ..................... PASS
POST:
RTC Battery ok at last cold boot (0xb)
RTC date Saturday 3/26/2015 21:20:46
POST SPD test ............................... PASS
POST Lower DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=4b
Short memory cell test
Perf cnt (curr/fixed): 24afb008/24b115a8
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
DxE POST
Installation Instructions for ONIE and the Dell OS 18