Specifications

9 The BIOS boots from the ONIE Recovery USB device. In the Grub menu, select the ONIE: Embed ONIE
option, as shown.
Figure 3. ONIE: Embed ONIE Option
10 This installs ONIE on the disk and reboots the system to regular ONIE mode. The following shows
detailed logs using the Embed ONIE option on a Dell Networking S6000 platform:
Loading vmlinuz......
Loading initrd.xz................ready.
Linux version 3.2.35-onie+ (lsharma@netlogin-eqx-03) (gcc version 4.7.3
(crosstool-NG 1.19.0 - ONIE-n.n.n.n) ) #1 SMP Wed Jun 24 14:17:18 PDT 2015
Command line: initrd=initrd.xz console=tty0 console=ttyS1,115200n8
boot_env=recovery boot_reason=embed install_url=file:///lib/onie/onie-updater
BOOT_IMAGE=vmlinuz
.
.
.
.
Please press Enter to activate this console. Info: eth0: Checking link... up.
Info: Trying DHCPv4 on interface: eth0
DHCPv4 on interface: eth0 failedONIE: Using default IPv4 addr: eth0:
192.168.3.10/255.255.255.0
ONIE: Starting ONIE Service Discovery
Info: Found static url: file:///lib/onie/onie-updater
ONIE: Executing installer: file:///lib/onie/onie-updater
Verifying image checksum ... OK.
Preparing image archive ... OK.
ONIE: Version : n.n.n.n
ONIE: Architecture : x86_64
ONIE: Machine : dell_<
platform>_<processor ID>
ONIE: Machine Rev : 0
ONIE: Config Version: 1
Installing ONIE on: /dev/sda
Rebooting...
discover: ONIE embed mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 283: No such
process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
The system is going down NOW!
Installation Instructions for ONIE and the Dell OS 13