Specifications

onie-recovery-x86_64 100% |*******************************| 18432k 0:00:00 ETA
ONIE:/mnt #
2 Create a bootable USB using the ONIE .iso image.
ONIE:/mnt # dd if=onie-recovery-x86_64-dell_<platform>_<processor ID>-r0.iso
of=/dev/sdb bs=10
M
1+1 records in
1+1 records out
18874368 bytes (18.0MB) copied, 0.025707 seconds, 700.2MB/s
ONIE:/mnt #
3 Insert your USB device in the target system.
4 Power up the target system and enter the BIOS configuration menu.
5 Set boot option 1 to USB using the following path:
Advanced > USB configuration >Mass Storage Devices: <Name of your USB device>
[USB device]
Figure 2. USB Configuration
6 Set the Boot order to boot from the USB device using the following path:
Boot > Hard Drive BBS Priorities > Boot Option #1
7 In the Boot Option #1 option, select the device that corresponds to your USB device.
8 Select Save and exit the BIOS menu.
Installation Instructions for ONIE and the Dell OS 12