Specifications

Fan 3 is Present
Fan 3 Air flow type is Front To Rear
Fan 3 status Normal
Fan 3 speed is 3577 RPM
Getting Details for Fan 4
Fan 4 is Present
Fan 4 Air flow type is Front To Rear
Fan 4 status Normal
Fan 4 speed is 3526 RPM
Fan Controller Test LPC....................... Passed
Fan 1 speed is 3558 RPM
Fan 2 speed is 3581 RPM
Fan 3 speed is 3577 RPM
Fan 4 speed is 3529 RPM
optional module index :1
Slot:0, opt slot :0, Type:2
optional module index :2
Slot:1, opt slot :1, Type:2
optional module index :3
Slot:2, opt slot :2, Type:2
optional module index :4
Slot:3, opt slot :3, Type:2
Testing Temp sensor devices:
No. of sensors in the system :10
Temperature Sensor 1 temperature value is 31.2 C and temperature is normal
....................... Passed
Temperature Sensor 2 temperature value is 32.7 C and temperature is normal
....................... Passed
Temperature Sensor 3 temperature value is 29.3 C and temperature is normal
....................... Passed
Temperature Sensor 4 temperature value is 28.2 C and temperature is lower than HW
lower threshold
....................... FAILED <<<---
Temperature Sensor 5 temperature value is 28.7 C and temperature is normal
....................... Passed
Temperature Sensor 6 temperature value is 29.2 C and temperature is normal
....................... Passed
Temperature Sensor 7 temperature value is 29.3 C and temperature is normal
....................... Passed
Temperature Sensor 8 temperature value is 30.2 C and temperature is normal
....................... Passed
Temperature Sensor 9 temperature value is 27.7 C and temperature is normal
....................... Passed
Temperature Sensor 10 temperature value is 20.1 C and temperature is normal
....................... Passed
Temp Sensors: Overall test results -------------------- >>> FAILED <<<---
Testing Programmable Devices:
PL Tool test:
IOM1CPLD: SW_SCRATCH.................... Passed
IOM2CPLD: SW_SCRATCH.................... Passed
IOM3CPLD: SW_SCRATCH.................... Passed
IOM4CPLD: SW_SCRATCH.................... Passed
CPLD1 .................... Passed
SmartFusion FPGA .................... Passed
bus:dev.fn 08:00.0
[00000000]: 0xee 0x10 0x21 0x70 0x07 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x10 0x00
0x00 0x00 || ..!p............
[00000010]: 0x00 0x00 0xe0 0xdf 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 || ................
[00000020]: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xee 0x10
0x07 0x00 || ................
[00000030]: 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x07 0x01
0x00 0x00 || ....@...........
[00000040]: 0x01 0x48 0x23 0x00 0x08 0x00 0x00 0x00 0x05 0x60 0x80 0x00 0x00 0x00
Dell DiagOS Tools 100