Users Guide

is a delimiting character

Dell(conf)#no banner login ?

acknowledgement Disable positive acknowledgment required

after login prompt

keyboard-interactive Prompt will be displayed by default

If you configure the acknowledgement keyword, the system requires a positive

acknowledgement from the user while logging in to the system.

$ telnet 10.11.178.16

Trying 10.11.178.16...

Connected to 10.11.178.16.

Escape character is '^]'.

THIS IS A LOGIN BANNER. PRESS ‘Y’ TO ACKNOWLEDGE. ACKNOWLEDGE?

[y/n]: y

Password:

Commands

• banner motd — sets a Message of the Day banner.

• banner exec — enables the display of a text string when you enter EXEC mode.

banner motd

Set a message of the day (MOTD) banner.

Syntax

banner motd c line c

To delete a Message of the Day banner, enter no banner motd.

Parameters

c Enter a delineator character to specify the limits of the text

banner. The delineator is a percent character (%).

line Enter a text string for your MOTD banner the message with your

delineator. The delineator is a percent character (%).

Defaults No banner is configured.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

Control and Monitoring 98