Users Guide

Control and Monitoring

This section contains command information to configure and monitor the system, including Telnet, file

transfer protocol (FTP), and trivial file transfer protocol (TFTP).

banner exec

Configure a message that is displayed when your enter EXEC mode.

Syntax

banner exec c line c

To delete a banner, use the no banner exec command.

Parameters

c Enter the keywords banner exec, then enter a character

delineator, represented here by the letter c. Press ENTER.

line Enter a text string for your banner message ending the message

with your delineator. In the following example, the delineator is

a percent character (%); the banner message is “testing, testing”.

Defaults No banner is displayed.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

Control and Monitoring 95