Users Guide

a next-hop IPv6 address in order for the ping command to
detect the destination address.
ipv6-address (OPTIONAL) Enter the forwarding router IPv6 address in the
x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
distance (OPTIONAL) Enter a number as the metric distance assigned to
the route. The range is from 1 to 255.
tag value (OPTIONAL) Enter the keyword tag then a tag value number.
The range is from 1 to 4294967295.
permanent (OPTIONAL) Enter the keyword permanent to specify that the
route is not to be removed, even if the interface assigned to that
route goes down.
NOTE: If you disable the interface with an IPv6 address
associated with the keyword permanent, the route
disappears from the routing table.
weight weight-
value
Enter the keyword weight followed by a weight value. The
range is from 0 to 255.
NOTE: Weight for a static route can be added only for
the destination address and not for the route pointing to
destination a interface.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Also included the weight parameter to
support weighted ECMP feature. Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
IPv6 Basics 929