Users Guide

IPv6 Basics

IPv6 basic commands are supported on the Dell Networking OS.

NOTE: For information about the Dell Networking OS version and platform that supports IPv6 in each

software feature, see the IPv6 Addressing section in the Dell Networking OS Configuration Guide.

Topics:

• cam-ipv6 extended-prefix

• clear ipv6 route

• maximum dynamic-routes-ipv6

• show cam-ipv6 extended-prefix

• ipv6 unicast-host-route

• ipv6 nd dns-server

• ipv6 route

• show ipv6 management-route

• show ipv6 route

cam-ipv6 extended-prefix

Enable LPM partitioning to support IPv6 /65 to /128 route prefixes to be stored in Partition 1.

Syntax

cam-ipv6 extended-prefix <Max-IPv6-prefixes>

To remove LPM partitioning configuration, use no cam-ipv6 extended-prefix.

Parameters

Max-IPv6-Prefix Maximum number of IPv6 prefixes in the mask length of /65 to /

128. The possible values are 1024, 2048, and 3072.

Defaults LPM is not partitioned with Partition 1 and therefore /65 to /128 prefixes are not

converted to /64 prefixes and are installed and saved in LPM. All the packets for those

routes traverse through the default route path.

Command Modes CONFIGURATION

IPv6 Basics 922