Users Guide

Example
Dell#upgrade system ?
flash: Copy from flash file system (flash://filepath)
ftp: Copy from remote file system, IPv4 or IPv6, (ftp://
userid:password@hostip/filepath)
scp: Copy from remote file system, IPv4 or IPv6, (scp://
userid:password@hostip/filepath)
stack-unit Sync image to the stack-unit
tftp: Copy from remote file system, IPv4 or IPv6, (tftp://
hostip/filepath)
usbflash: Copy from usbflash file system (usbflash://filepath)
Dell#
upgrade boot
Upgrade the bootflash image or bootselector image.
Syntax
upgrade boot {all | bootflash—image | bootselector-image}stack-
unit {stack—unit—id | all}{booted | flash: | ftp: | scp: | tftp: |
usbflash:} {A: |B:}
Parameters
all Enter the keyword all to change both the bootflash and
bootselector images.
bootflash-image Enter the keyword bootflash-image to change the bootflash
image..
bootselector-
image
Enter the keyword bootselector-image to upgrade the BIOS
system image.
stack-unit-id Enter the stack–unit–id to upgrade only the mentioned
stack-unit .
all Enter the keywords all to upgrade the member stack-units.
booted Enter the keyword booted to upgrade from the current image
on the device.
ftp: Enter the keyword ftp to follow it with the location of the
source file in this form: //userid:password@hostip/filepath, or
press Enter to launch a prompt sequence.
tftp: Enter the keyword tftp to follow it with the location of the
source file in this form: //hostlocation/filepath, or press Enter to
launch a prompt sequence.
flash: Enter the keyword flash to follow it with the location of the
source file in this form: //filepath, or press Enter to launch a
prompt sequence.
File Management 92