Users Guide

Items Description
Vlan membership Lists the VLANs to which the interface is a member. Starting with
Dell Networking OS version 7.6.1, this field can display native
VLAN membership by the port.
Example
Dell# show interfaces switchport
Name: TenGigabitEthernet 1/1/1
802.1QTagged: Hybrid
Vlan membership:
Vlan 2, Vlan 20
Native VlanId: 20
Name: TenGigabitEthernet 1/2/1
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TenGigabitEthernet 1/3/1
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TenGigabitEthernet 1/4/1
802.1QTagged: True
Vlan membership:
Vlan 2
--More--
Related
Commands
• interface — configure a physical interface on the switch.
• show ip interface — display Layer 3 information about the interfaces.
• show interfaces — display information on a specific physical interface or virtual
interface.
• show interfaces transceiver — display the physical status and operational status of
an installed transceiver. The output also displays the transceiver’s serial number.
show interfaces transceiver
Display the physical status and operational status of an installed transceiver. The output also displays the
transceiver’s serial number.
Syntax
show interfaces interfaces transceiver
Parameters
interfaces
interfaces
(OPTIONAL) Enter one of the following keywords and then the
interface information:
• For a port channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport
information.
Interfaces 812