Users Guide

Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:05:12
Queueing strategy: fifo
Time since last interface status change: 00:05:12
Related
Commands
• show interfaces configured – display any interface with a non-default
configuration.
• show inventory (S-Series and Z-Series) – display the S-Series and Z-Series switch
types, components (including media), Dell Networking OS version including
hardware identification numbers, and configured protocols.
• show ip interface – display Layer 3 information about the interfaces.
• show range – display all interfaces configured using the interface range
command.
show interfaces configured
Display any interface with a non-default configuration.
Syntax
show interfaces configured
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Interfaces 800