Users Guide

• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For stack-units, enter the keywords stack-unit then the
slot/port information.
• For a Null interface, enter the keyword null then the Null
interface number.
• For a port channel interface, enter the keywords port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
• For a tunnel interface, enter the keyword tunnel then the
tunnel ID. The range is from 1 to 16383.
NOTE: This command also enables you to view
information corresponding to a range of ports. However,
for Open Networking (ON) platforms the notation for
specifying port range in the command is different from
how you specify in non-ON platforms.
-range (Optional) Enter the range of interfaces for which you want to
view the information. The format is interface-type slot/
port/[subport]-slot/port/[subport]
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON. Introduced
display information about EEE on S3100, S4820T, and S5000.
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Added support to display the interface configurations
corresponding to a range of ports.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Interfaces 793