Users Guide

Version Description
pre-Version
6.2.1.0
Introduced on the E-Series.
Example
Dell(conf-if-fo-1/4)# show config
!
interface fortyGigE 1/4
no ip address
mtu 9216
switchport
no shutdown
Dell(conf-if-fo-1/4)#
show config (for speed)
Syntax
show config
Command Modes INTERFACE MODE
Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.1) Introduced on the S6000.
Usage Information
In order for the speed information corresponding to an interface to appear in the show
command output, you must first configure the speed of that interface using the speed
command.
Example
Dell(conf-if-te-1/1/1)#speed ?
100 100 Mbps
1000 1000 Mbps
10000 10000 Mbps
auto Auto negotiation (default)
Dell(conf-if-te-1/1/1)#speed 100
Dell(conf-if-te-1/1/1)#show config
interface TenGigabitEthernet 1/1/1
speed 100
no shutdown
show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (interface range).
Syntax
show config
Command Modes CONFIGURATION INTERFACE (conf-if-range)
Interfaces 791