Users Guide

Port 0

• auto-negotiation enabled* speed 1000 or auto

• auto-negotiation enabled speed 100

• auto-negotiation disabled speed 100

• auto-negotiation enabled* speed 1000 or auto

Port 1

• auto-negotiation enabled* speed 1000 or auto

• auto-negotiation enabled speed 100

• auto-negotiation disabled speed 100

• auto-negotiation enabled speed 100

• auto-negotiation disabled speed 100

Link Status Between Port 1 and Port 2

• Up at 1000 Mb/s

• Up at 100 Mb/s

• Down

* You cannot disable auto-negotiation when the speed is set to 1000 or auto.

portmode hybrid

To accept both tagged and untagged frames, set a physical port or port-channel. A port configured this way

is identified as a hybrid port in report displays.

Syntax

portmode hybrid

To return a port to accept either tagged or untagged frames (non-hybrid), use the no

portmode hybrid command.

Defaults non-hybrid

Command Modes INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

Interfaces 787