Users Guide

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,

Z9000, and Z9500.

Usage Information IGMP commands accept only non-VLAN interfaces — specifying VLAN does not yield

results. This command displays packets for IGMP and IGMP snooping.

ip igmp snooping enable

Enable IGMP snooping on all or a single VLAN. This command is the master on/off switch to enable IGMP

snooping.

Syntax

ip igmp snooping enable

To disable IGMP snooping, use the no ip igmp snooping enable command.

Defaults Disabled.

Command Modes

• CONFIGURATION

• INTERFACE VLAN