Users Guide

• xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of
CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 — 16 bit XOR
Enter the keywords stack-unit, then a stack-unit number, to
specify a stack-unit.
Enter the keywords port-set port-pipe then the port pipe
number. The range is from 0 to 5.
hg-seed seed-
value stack-unit
Enter the keywords hg-seed then the hash algorithm seed
value. The range is from 0 to 2147483646.
Enter the keywords stack-unit then the stack unit number.
Enter the keywords port-set then the stack-unit port-pipe
number.
lag hash algorithm Enter the keywords hg-seed . The range is from 0 to 47.
nh-ecmp
hashalgorithm
value
(OPTIONAL) Enter the keyword nh-ecmp then the ECMP hash
algorithm value.
stack-unit
number
(OPTIONAL) : Enter the keywordstack—unit then the stack—unit
slot number.
ip-sa-mask value
(OPTIONAL) Enter the keyword ip-sa-mask then the ECMP/LAG
hash mask value. The range is from 0 to FF.
ip-da-mask value
(OPTIONAL) Enter the keyword ip-da-mask then the ECMP/LAG
hash mask value. The range is from 0 to FF.
Defaults IPSA and IPDA mask value is FF for the stack-unit.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.9(0.0) Added flow-based-hashing support for hashing on ECMP for
S4820T, S6000, S4048 and Z9500.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Equal Cost Multi-Path (ECMP) 662