Users Guide

Example

Dell(conf)# dcb pfc-total-buffer-size 5000

Dell(conf)# dcb pfc-total-buffer-size 4000

%ERROR: Total pfc buffer size configured cannot accommodate

existing buffer requirement in the system.

show running-config dcb-buffer-

threshold

Displays the DCB buffer threshold details in the running configuration.

Syntax

show running—config dcb-buffer-threshold

Command Modes

EXEC

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.7(0.0) Introduced on the S6000-ON and Z9500.

9.3(0.0) Introduced on the S6000 platform.

Usage Information

The following table describes the output fields displayed for the show running-

config dcb-buffer-threshold command:

Field Description

Profile name Name of the DCB buffer threshold profile

Priority The priority of the queue for which the buffer space settings

apply

buffer-size Ingress buffer size

pause-threshold-

value

Buffer limit at which the port sends the pause to peer in KB.

resume-

threshold-value

Buffer offset limit at which the port resumes the peer in KB.

Data Center Bridging (DCB) 571