Users Guide

Parameters
l2-dlf Enter the keywords l2-dlf to drop flooding traffic on lossless
priorities.
drop Enter the keyword drop to enable the drop action.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and
S6100–ON.
Related
Commands
show hardware pfc-nodrop-priority — displays the packets drop count corresponding
to the priority.
pfc priority
Configure the CoS traffic to be stopped for the specified delay.
Syntax
pfc priority priority-range
To delete the pfc priority configuration, use the no pfc priority command.
Parameters
priority-range Enter the 802.1p values of the frames to be paused. Separate the
priority values with a comma; specify a priority range with a
dash; for example, pfc priority 1,3,5-7. The range is from 0 to 7.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Data Center Bridging (DCB) 536