Users Guide

PFC Commands
The following PFC commands are supported on the Dell Networking OS.
clear hardware pfc-nodrop-priority
Clear the drop statistics.
Syntax
clear hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-
unit-number port-set port-pipe
Parameters
stack-unit stack-
unit-number
Enter the keywords stack-unit and the stack unit number.
port-set port-pipe Enter the keywords port-set and port-pipe number. The port-
pipe number is 0.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and
S6100–ON.
Related
Commands
pfc-nodrop-priority l2-dlf drop — configures to drop the unknown unicast packets
flooding on lossless priorities.
show hardware pfc-nodrop-priority — displays the packets drop count corresponding
to the priority.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
Syntax
clear pfc counters [interface-type | stack-unit {unit number |
all } all stack-ports all}]
Data Center Bridging (DCB) 533