Users Guide

Field Description
Weight Displays the route’s weight
Path Lists all the AS paths the route passed through to reach the
destination network.
Example
Dell# show ip bgp regexp ^200
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 55.0.0.0/24 172.16.0.2 0 200 i
*> 66.0.0.0/24 172.16.0.2 0 200 i
Dell#
show ip bgp summary
Allows you to view the status of all BGP connections.
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] summary
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the
VRF to view the status of all BGP connections corresponding to
that VRF.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related only to ipv6 unicast routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Border Gateway Protocol 500