Users Guide

Example
Dell# show ip bgp peer-group
Peer-group port0, remote AS 200
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP neighbor is port0, peer-group external
Update packing has 4_OCTET_AS support enabled
Number of peers in this group 1
Maximum limit on the accepted connections 256
Peer-group members (* - outbound optimized):
172.16.0.2
Dell#
Related
Commands
• neighbor peer-group (assigning peers) — assign a peer to a peer-group.
• neighbor peer-group (creating group) — create a peer group.
show ip bgp regexp
Display the subset of the BGP routing tables matching the regular expressions specified.
Syntax
show ip bgp [vrf vrf-name] regexp regular-expression [character]
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to view
the subset of BGP routing tables that match the regular
expression specified on that VRF.
NOTE: You can use this attribute to view the subset of
BGP routing tables that match the regular expression
that is specified on either a default or a non-default VRF.
regular-
expression
[character]
Enter a regular expression then use one or a combination of the
following characters to match:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (zero or more
sequences).
• + = (plus) the sequences in a pattern (one or more
sequences).
• ? = (question mark) sequences in a pattern (either zero or
one sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to
entering the ? regular expression.
• [ ] = (brackets) a range of single-character patterns.
Border Gateway Protocol 498