Users Guide

Parameters

bandwidth Enter the keyword bandwidth to specify extended-community

attribute as the matching criteria for denying traffic. The range is

from 0 to 102400.

Defaults N/A

Command Modes EXTENDED COMMUNITY LIST

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S-Series and Z9500.

Commands

• permit bandwidth – specify link band width extended-community attribute as the

matching criteria to permitting incoming or outgoing traffic.

description

Enter a description of the BGP routing protocol.

Syntax

description {description}

To remove the description, use the no description {description} command.

Parameters

description Enter a description to identify the BGP protocol (80 characters

maximum).

Defaults none

Command Modes ROUTER BGP