Users Guide

Version Description
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To view information on both incoming and outgoing routes, do not include the in and
out parameters in the debugging command. The in and out parameters cancel each
other; for example, if you enter the
debug ip bgp in command and then enter the
debug ip bgp out command, you do not see information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for
BGP.
Related
Commands
• debug ip bgp events — view information about BGP events.
• debug ip bgp keepalives — view information about BGP keepalives.
• debug ip bgp notifications — view information about BGP notifications.
• debug ip bgp updates — view information about BGP updates.
• show debugging — view enabled debugging operations.
debug ip bgp dampening
View information on routes being dampened.
Syntax
debug ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6
unicast] dampening
To disable debugging, use the no debug ip bgp dampening command.
Parameters
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view
information on dampened routes corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view dampened-route information related only
to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view dampened-route information related only
to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view dampened-route information related only to
ipv6 unicast routes.
Border Gateway Protocol 413