Users Guide

interface management ethernet ip
address
Assign an IP address to the Management Ethernet interface.
Syntax [no] interface management ethernet ip address ip-address mask
To delete the IP address, enter no interface management ethernet ip address.
Defaults Not configured.
Command Modes BOOT_USER
Command History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage Information
In the runtime CLI, use the ip address command in INTERFACE mode to change the
Management interface’s IP address.
To view the current IP address configured on the Management interface, enter the
show interfaces management ethernet command
Related
Commands
show_default-gateway — Display the IP address configured for the default gateway.
show_interface_mangement_ethernet— Display the IP address configured for the
Management interface.
NVRAM erase
Erase all NVRAM contents alone.
Syntax nvram erase
Boot Command Line Interface 369