Users Guide

boot zero
Erase the configured primary, secondary, or default boot image parameters. If you erase all three parameters,
the S6000 switch boots from its internal Flash.
Syntax boot zero primary | secondary | default}
Parameters
primary
Enter the keyword primary to configure the boot parameters
used in the first attempt to boot the system.
secondary
Enter the keyword secondary to configure boot parameters
used if the primary operating system boot selection is not
available.
default
Enter the keyword default to configure boot parameters used if
the secondary operating system boot parameter selection is not
available. You can configure this option to any of the available
type, for example flash/usb/ftp/tftp.
Defaults None
Command Modes BOOT_USER
Command History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage Information
This command reverses changes made with the boot change command.
BOOT_USER # boot zero primary
BOOT_USER # boot zero secondary
BOOT_USER # boot zero default
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
Boot Command Line Interface 365