Users Guide

shows the completed command:
BOOT_USER # boot change primary
'.' = clear field; '-' = go to previous field
boot device : ftp
file name : tt/latestlabel
Server IP address : 10.16.1.200
username : amsterdam
password : ******
BOOT_USER #
To view the current boot configuration, use the show bootvar command.
Related
Commands
show_bootvar — Display boot configuration information.boot_zero — Remove the
primary, secondary, or default boot image configuration.
boot message
Use this command to enable/disable boot logs during reload.
Syntax boot message on | off
Parameters
on Enter the keyword on to turn on boot logs during reload.
off
Enter the keyword off to suppress the boot logs during reload.
NOTE: By default, watchdog is disabled.
Defaults None
Command Modes BOOT_USER
Command History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example
BOOT_USER #boot message
boot messages off
BOOT_USER #
Boot Command Line Interface 363