Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
• match community — redistribute routes that match the COMMUNITY attribute.
• show ip bgp community — display BGP community groups.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
To remove a set level condition, use the no set level {backbone | level-1 |
level-1-2 | level-2 | stub-area} command.
Parameters
backbone Enter the keyword backbone to redistribute matched routes to
the OSPF backbone area (area 0.0.0.0).
level-1 Enter the keyword level-1 to redistribute matched routes to
IS-IS Level 1.
level-1-2 Enter the keyword level-1-2 to redistribute matched routes to
IS-IS Level 1 and Level 2.
level-2 Enter the keyword level-2 to redistribute matched routes to
IS-IS Level 2.
stub-area Enter the keyword stub to redistributed matched routes to
OSPF stub areas.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Dell Networking OS Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Access Control Lists (ACL) 290