Users Guide

To disable matching filter, use the no match origin {igp | egp | incomplete}
command.
Parameters
egp Enter the keyword egp to match routes originating outside the
AS.
igp Enter the keyword igp to match routes originating within the
same AS.
incomplete Enter the keyword incomplete to match routes with
incomplete routing information.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
pre-6.1.1.0 Introduced on the E-Series.
match route-type
To match routes based on the how the route is defined, configure a filter.
Syntax
match route-type {external [type-1 | type-2] | internal | level-1
| level-2 | local}
To delete a match, use the no match route-type {local | internal |
external [type-1 | type-2] | level-1 | level-2} command.
Access Control Lists (ACL) 281