Users Guide

• For a VLAN interface, enter the keyword vlan, and then a
number from 1 to 4094.
brief (OPTIONAL) Enter the keyword brief to view a table of
information on the VRRP groups.
vrf vrf-name Enter the keyword vrf then the name of the VRF to view IPv6
VRRP groups corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.3.2.0 Introduced on the E-Series.
Usage Information The following describes the show vrrp ipv6 command.
Line starting
with
Description
GigabitEthernet... Displays the interface, VRRP group ID, and network address. If
the interface is not sending VRRP packets, 0.0.0.0 appears as the
network IP address.
VRF VRF instance to which the VRRP group interface belongs.
State: master... Displays the interface’s state:
• Na/If (not available)
• master (MASTER virtual router)
• backup (BACKUP virtual router)
Virtual Router Redundancy Protocol (VRRP) 1956