Users Guide

Version Description
6.2.1.1 Introduced on the E-Series.
Example
Dell(conf-if-vrid-4)# show config
vrrp-group 4
virtual-address 119.192.182.124
!
Dell(conf-if-vrid-4)#
show vrrp
View the VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns No
Active VRRP group
.
Syntax
show vrrp [vrrp-id][brief][interface type][ipv6][interface type]
[vrf vrf-name]
Parameters
vrrp-id (OPTIONAL) Enter the virtual router identifier for the VRRP group
to view only that group. The range is from 1 to 255.
brief (OPTIONAL) Enter the keyword brief to view a table of
information about the VRRP groups.
interface type (OPTIONAL) Enter the following keywords and the interface
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan, and then
the VLAN ID. The VLAN ID range is from 1 to 4094.
ipv6 (OPTIONAL) Enter the keyword ipv6 to view only VRRP IPv6
groups.
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the
VRF to view active VRRP groups corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Virtual Router Redundancy Protocol (VRRP) 1942