Users Guide

Usage Information After you configure a VLT domain on each peer switch and connect (cable) the two
VLT peers on each side of the VLT interconnect, the system elects a primary and
secondary VLT peer device. To configure the primary and secondary roles before the
election process, use the primary-priority command. Enter a lower value on the
primary peer and a higher value on the secondary peer.
If the primary peer fails, the secondary peer (with the higher priority) takes the primary
role. If the primary peer (with the lower priority) later comes back online, it is assigned
the secondary role (there is no preemption).
show vlt brief
Displays summarized status information about VLT domains configured on the switch.
Syntax
show vlt brief
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information The version shown in the show vlt brief output command displays the VLT version
number which is different from the Dell Networking OS version number. VLT version
numbers begin with odd numbers.
Example (Brief)
Dell#show vlt brief
VLT Domain Brief
------------------
Domain ID : 1
Virtual Link Trunking (VLT) 1902