Users Guide

Nu 0,
Vl 1
test1 1 Te 1/25/1,1/28/4-1/29/3
test2 2 Te 1/32/1
management 64
Dell# show ip vrf test1
VRF-Name VRF-ID Interfaces
test1 1 Te 1/29/4,1/30/1-1/31/3
Dell#
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage Information This command displays information from the running-config corresponding to either a
specific VRF or all the VRFs in the system.
Example
Dell# show run vrf test3
!
ip vrf test3
Virtual Routing and Forwarding (VRF) 1881