Users Guide

interface interface (OPTIONAL) Enter the keyword interface and the type slot/
port of the interface you want displayed. Type slot/port options
are the following:
• For a port-channel interface, enter the keywords port-
channel
then the port-channel ID.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
root (OPTIONAL) Enter the keyword root to display configuration
information on the spanning tree group root.
summary (OPTIONAL) Enter the keyword summary to only the number of
ports in the spanning tree group and their state.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.4.2.1 Added support for the optional guard keyword on the C-Series,
S-Series, and E-Series.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information Enable spanning tree group 0 prior to using this command.
Spanning Tree Protocol (STP) 1790