Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6000, S6000–ON, S61000–ON, Z9100–
ON.
Usage Information The show storm-control pfc status command is used to view the status of the
PFC storm on the specified stack unit and the port set.
Example
Dell#show storm-control pfc status stack-unit 0 port-set 0
-------------------------------------------------------------------
Interface Priority State Duration in Pkts Dropped
discard state
(in ms)
-------------------------------------------------------------------
Te 0/0 3 Drop 15140 17365627
4 Drop 15040 17381908
5 Drop 15040 17381640
6 Drop 15040 17372119
Te 0/1 3 Normal 0 0
4 Normal 0 0
5 Normal 0 0
6 Normal 0 0
Te 0/2 3 Drop 14880 8682814
4 Drop 14880 8690956
5 Drop 14880 8690823
6 Drop 14780 8686064
Te 0/3 3 Drop 14780 8682775
4 Drop 14760 8690918
5 Drop 14760 8690786
6 Drop 14760 8686030
Te 0/4 3 Drop 14760 8682643
4 Drop 14760 8690784
5 Drop 14740 8690653
6 Drop 14740 8685901
Te 0/5 3 Drop 14740 8680780
4 Drop 14640 8688702
5 Drop 14540 8688349
6 Drop 14540 8683376
Te 0/80 3 Normal 0 0
4 Normal 0 0
5 Normal 0 0
6 Normal 0 0
Dell#
show storm-control pfc statistics
You can view the statistical details of the PFC storm on a stack unit with specified port set.
Syntax
show storm-control pfc statistics stack-unit {unit-number} port-
set {portpipe-number
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Storm Control 1766