Users Guide

Field Description
Connection The stack port ID to which this unit’s stack port is connected.
Example
Dell#show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
---------------------------------------------------------
1/4 5/4 42 up up
1/12 2/1 42 up up
2/1 1/12 42 up up
2/4 5/12 42 up up
5/4 1/4 42 up up
5/12 2/4 42 up up
Example (Status)
Example
(Topology)
Dell#show system stack-ports topology
Topology: Daisy chain
Interface Connection
---------------------
1/25/1 3/25/1
1/26/1
1/27/1
1/28/1
3/25/1 1/25/1
3/26/1
3/27/1
3/28/1
Related
Commands
• reset stack-unit – resets the designated stack member.
• show hardware stack-unit – displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
• show system (S-Series and Z-Series) – displays the current status of all stack
members or a specific member.
stack-unit priority
Configure the ability of a switch to become the management unit of a stack.
Syntax
stack-unit stack-number priority priority-value
Parameters
stack-number Enter the stack member unit identifier.
priority-value This preference parameter allows you to specify the
management priority of one backup switch over another, with 1
as the lowest priority and 14 being the highest. The switch with
Stacking 1754