Users Guide

Version Description
9.3(0.0) Added support for the AES128-CFB encryption algorithm on the
S4820T, S4810, S6000 and Z-Series platforms
Usage Information
To enable robust, effective protection and security for SNMP packets transferred
between the server and the client, you can use the snmp-server user username
group groupname 3 auth authentication-type auth-password priv
aes128 priv-password to specify that AES128-CFB encryption algorithm needs to
be used.
You cannot modify the FIPS mode if SNMPv3 users are already configured and present
in the system. An error message is displayed if you attempt to change the FIPS mode by
using the fips mode enable command in Global Configuration mode. You can
enable or disable FIPS mode only if SNMPv3 users are not previously set up. Otherwise,
you must remove the previously configured users before you change the FIPS mode.
Example
Dell# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv aes128
d0452401a8c3ce42804fe80e3ba8763d
Related
Commands
• show snmp user — Displays the information configured on each SNMP user
name.
snmp-server view
Configure an SNMPv3 view.
Syntax
snmp-server view view-name oid-tree {included | excluded}
To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree
{included | excluded} command.
Parameters
view-name Enter the name of the view (not to exceed 20 characters).
oid-tree Enter the OID sub tree for the view (not to exceed 20
characters).
included (OPTIONAL) Enter the keyword included to include the MIB
family in the view.
excluded (OPTIONAL) Enter the keyword excluded to exclude the MIB
family in the view.
Defaults none
Command Modes CONFIGURATION
Simple Network Management Protocol (SNMP) and Syslog 1710