Users Guide

HMAC-SHA1-96. These are the full forms or editions of the truncated versions, namely, HMAC-MD5 and
HMAC-SHA1 authentication algorithms.
Syntax
snmp-server user name {group_name remote ip-address udp-port port-
number} [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-password]
[priv {des56 | aes128–cfb} priv– password] [access access-list-
name | ipv6 access-list-name | access-list-name ipv6 access-list-
name]
To remove a user from the SNMP group, use the no snmp-server user name
{group_name remote ip-address udp-port port-number} [1 | 2c | 3]
[encrypted] [auth {md5 | sha} auth-password] [priv {des56 |
aes128–cfb} priv-password] [access access-list-name | ipv6 access-
list-name
| access-list-name ipv6 access-list-name] command.
Parameters
auth-password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host and to send packets to the host. Minimum: eight characters
long.
aes128 (OPTIONAL) Enter the keyword aes128 to initiate the AES128-
CFB encryption algorithm for transmission of SNMP packets.
priv-password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of the
message it sends to the agent and to decrypt the contents of the
message it receives from the agent. Minimum: eight characters
long.
Defaults If no authentication or privacy option is configured, then the messages are exchanged
(attempted anyway) without any authentication or encryption.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Simple Network Management Protocol (SNMP) and Syslog 1709