Users Guide

Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 3600 seconds
Max-EAP-Req: 2
Host Mode: SINGLE_HOST
Auth PAE State: Initialize
Backend State: Initialize
Dell#
SSH and SCP Commands
Dell Networking OS supports secure shell (SSH) protocol versions 1.5 and 2.0. SSH is a protocol for secure
remote login over an insecure network. SSH sessions are encrypted and use authentication.
crypto key generate
Generate keys for the SSH server.
Syntax
NOTE: Some of the parameters in this command require licensing to access. For
more information, contact your Dell Networking representative.
crypto key generate {rsa | rsa1}
Parameters
rsa Enter the keyword rsa then the key size to generate a SSHv2
RSA host keys. The range is from 1024 to 2048 if you did not
enable FIPS mode; if you enabled FIPS mode, you can only
generate a 2048-bit key. The default is 1024.
NOTE: You must have a license to access the FIPS mode.
For more information, contact your Dell Networking
representative.
rsa1 Enter the keyword rsa1 then the key size to generate a SSHv1
RSA host keys. The range is from 1024 to 2048. The default is
1024.
NOTE: This option is not available in FIPS mode.
Defaults Key size 1024; if you enable FIPS mode, the key size is 2048.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Security 1621