Users Guide

To remove the threshold values, use the no threshold min number max number
command.
Parameters
min number Enter the keyword min then the minimum threshold number for
the WRED profile. The range is from 1 to 9360.
max number Enter the keyword max then the maximum threshold number
for the WRED profile. The range is from 1 to 9360 KB.
max-drop-drop
number
Enter the keyword max-drop-drop followed by the maximum
number of packets for the WRED profile. The range is from 0 to
100 KB
Defaults none
Command Modes CONFIGURATION (config-wred)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Usage Information To configure the minimum and maximum threshold values for user-defined profiles,
use this command. Additionally, to modify the minimum and maximum threshold
values for the pre-defined WRED profiles, use this command. If you delete the
threshold values of the pre-defined WRED profiles, the profiles revert to their original
default values.
Quality of Service (QoS) 1466