Users Guide

Field Description
Estimated CAM
per Port
Indicates the number of free CAM entries required (for the
classification rules) to apply the input policy map on a single
interface.
NOTE: The CAM entries for the default rule are not
included in this column; a CAM entry for the default rule
is always dedicated to a port and is always available for
that interface.
Status (Allowed
ports)
Indicates if the input policy map configuration on an interface
belonging to a stack-unit/port-pipe is successful — Allowed (n)
— or not successful — Exception. The allowed number (n)
indicates the number of ports in that port-pipe on which the
Policy Map can be applied successfully.
NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the
output contains only L2ACL CAM partition entries.
Example
Dell# test cam-usage service-policy input pmap_l2 stack-unit all
For a L2 Input Policy Map pmap_l2, the output must be as follows,
stack-unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per
Port |Status
| | | |per
Port |(Allowed ports)
0 0 L2ACL 500
200 Allowed (2)
0 1 L2ACL 100
200 Exception
1 0 L2ACL 1000
200 Allowed (5)
1 1 L2ACL 0
200 Exception
…
…
…
13 1 L2ACL 400 200
Allowed (2)
Dell#
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
S6000–ON
Syntax
threshold min number max number max-drop-drop
Quality of Service (QoS) 1465